Build your rack.
Choose a height, drop panels where you want them, and watch the rack, the box and the price follow. Every panel is generated at the numbers you set here and printed to order. The link in your address bar is your build — copy it to come back or to send it on.
How wide, and how tall?
Two widths, both on the same hole ladder, and a frame that prints in stackable three-unit sections and always ships with its carrying handles. Pick the width and how many sections, whether to close the top and the floor, what colour to print it in, and whether it gets an accent.
A side panel spans the rack’s depth and never its width, so a 10-inch and a 7.5-inch rack of the same depth take the same side panel. At 195 mm it prints as one plate; at 260 mm it prints in two halves joined by two bolts. The deep drive trays need 260 mm; going to 195 keeps every part that still fits and drops the rest.
Build the 10-inch rack instead — a separate product, on the same 15.875 mm hole ladder. Front panels do not move between the two; side panels of the same depth do.
Applies to the frame and every part already placed. A part tuned on its own can still pick a different shade.
A second filament on the two carrying handles, and on your name if you set one. It costs nothing: the kit is one price and already carries one colour change.
Raised on the front bar above the top unit — the same bar every rack ships with, up to 12 characters. Blank by default: nobody gets a name they did not ask for.
Fill the rack
Front and back go in any unit. Side panels cover a whole 3U section.
Every front part goes here too, turned to face out. Two deep ones in the same unit share the rack's 260mm, so a tray behind a tray will not fit.
In your box
6U in 2 sections
| 8 | Post | 229 g |
|---|---|---|
| 4 | Splice strap, front | 13 g |
| 4 | Splice strap, side | 23 g |
| 2 | Bottom bar | 155 g |
| 2 | Top bar | 43 g |
| 2 | Side rail | 62 g |
| 2 | Top rail, handle | 326 g |
| 72 | M6 heat-set insert, 8 mm | |
| 80 | M6 nyloc nut (DIN 985) | |
| 80 | M6 x 16 socket screw | |
About 850 g of PETG, 42 h on the printer.
- Rack base kit, 3U, 7.5-inch€134.00
- Rack extension, 3U, 7.5-inch1 × 3U above the base€65.00
Printed to order. Taxes included; shipping at checkout.
Still free. Checkout asks for a name and address — that is how Shopify records an order.
Our frame is a pre-order: the first kits ship once the printed prototype has been assembled and checked. Every dimension here is provisional until then. No printed part has been fitted to a rack yet.