All Products

Previous
A 2U drive tray with its upper shelf and support rails connected to the fixed floor assembly, printed straps and a floor vented with 5 mm hexagons on 8 mm centres, with front insert seats inside the end plates
View Design →

Drive Tray, 2U

€49
A 1U shelf for a multi-port USB charger, with four strap-down floor inserts in a loose rectangle and a fixed port window sized to its own row of ports, over a floor vented with 5 mm hexagons on 8 mm centres, with front insert seats inside the end plates
View Design →

USB Charger Shelf, 1U

€29
View Design →

The files for your rack

€0
The 3U 7.5-inch base kit drawn apart: every printed part, numbered as in the parts list — fourteen pieces, with the base in two tiles rather than four
View Design →

Rack base kit, 3U, 7.5-inch

€124
The 3U 7.5-inch extension drawn apart: four posts and the eight splice straps of the joint — the same twelve pieces as the 10-inch extension
View Design →

Rack extension, 3U, 7.5-inch

€65
A 1U badge panel wearing a name in raised letters, on a face vented with 5 mm hexagons on 8 mm centres and solid behind the lettering
View Design →

Badge Panel, 7.5-inch

€20
A 1U blanking panel vented with 5 mm hexagons on 8 mm centres: 190.5 mm wide, three mounting holes each side
View Design →

Blanking Panel, 7.5-inch

€20
A top panel vented with 5 mm hexagons on 8 mm centres: the lid, 190.5 mm across the rack and 195 mm deep, printed in one piece
View Design →

Top Panel, 7.5-inch

€14
Next