All Products

Previous
A 2U tray holding eight 2.5-inch drives stood on edge, between two printed combs whose fins form the slots, over a floor vented with 5 mm hexagons on 8 mm centres, with front insert seats inside the end plates
View Design →

SSD Tray, 2U

€38
A 1U shelf for a desktop network switch: a port window cut to the body width, with two printed straps arching over where the switch sits, on a floor vented with 5 mm hexagons on 8 mm centres, with front insert seats inside the end plates
View Design →

Switch Shelf, 1U

€32
A 2U LED matrix panel: two square windows for 8x8 WS2812 modules, each with four screws and a retainer frame behind it
View Design →

LED Matrix Panel, 2U

€28
A 1U Raspberry Pi cluster tray: three windows across the bezel, one per board, over a floor vented with 5 mm hexagons on 8 mm centres and drilled for twelve M2.5 standoffs, with front insert seats inside the end plates
View Design →

Raspberry Pi Cluster Tray, 1U

€26
A 1U Raspberry Pi tray for one Model B board: an opening for its USB and Ethernet edge, four clearance holes in a floor vented with 5 mm hexagons on 8 mm centres, with front insert seats inside the end plates
View Design →

Raspberry Pi Tray, 1U

€26
A 1U shelf for a small enclosed power supply, with four strap-down inserts in a floor vented with 5 mm hexagons on 8 mm centres and an open front for its leads, with front insert seats inside the end plates
View Design →

PSU Shelf, 1U

€30
A 1U antenna panel: a flat plate with round SMA bulkhead holes across its face, no venting
View Design →

Antenna Panel, 1U

€14
A 2U shelf for a NUC or thin client, strapped down by two printed straps arching over the body, with a front window cut to the body’s own width, over a floor vented with 5 mm hexagons on 8 mm centres, with front insert seats inside the end plates
View Design →

NUC Shelf, 2U

€36
Next