All Products

Previous
A 1U cable pass-through bar: two wide obround openings with a tie-off lip behind them
View Design →

Cable Pass-through Bar, 1U

€15
A 1U DC distribution panel: six barrel-jack bores across the front of a shallow box
View Design →

DC Power Distribution, 1U

€19
A 2U braced shelf: a floor vented with 5 mm hexagons on 8 mm centres between side walls that taper from full height at the front, with front insert seats inside the end plates
View Design →

Braced Shelf, 2U

€29
A 1U drive tray for one 3.5-inch drive, held by a printed strap over its top rather than by its holes, on a floor vented with 5 mm hexagons on 8 mm centres, with front insert seats inside the end plates
View Design →

Drive Tray, 1U

€33
A 2U mini-ITX tray with four verified board mounting holes, the ATX I/O opening and a floor vented with 5 mm hexagons on 8 mm centres, with front insert seats inside the end plates
View Design →

Mini-ITX Board Tray, 2U

€31
A 3U VESA display mount, printed in two halves, with a lightening field and cable slots
View Design →

VESA Display Mount, 3U

€21
A 1U badge panel wearing "My Rack" in raised letters, on a face vented with 5 mm hexagons on 8 mm centres and solid behind the lettering
View Design →

Badge Panel

€20
A 3U fan panel for two 92 mm fans, printed in two halves that lap between the bores
View Design →

Fan Panel, 3U — 92 mm

€20
Next