All Products

Previous
A 1U meter panel: a flat plate with three rectangular cutouts sized to panel-mount volt and amp meters, no venting
View Design →

Meter Panel, 1U

€13
A 2U tray standing six Raspberry Pi Model B boards on edge at the default 25 mm component lanes, between two printed combs with one bezel window per board, on a floor vented with 5 mm hexagons on 8 mm centres, with front insert seats inside the end plates
View Design →

Raspberry Pi Blade Tray, 2U

€36
A 1U tray for up to six Raspberry Pi Zero boards in two rows of three: a window per front-row board in the bezel, over a floor vented with 5 mm hexagons on 8 mm centres and drilled for both rows, with front insert seats inside the end plates
View Design →

Raspberry Pi Zero Cluster Tray, 1U

€26
A 2U mount bolted for an SFX or SFX-L power supply: a window for the fan and inlet face, with the supply’s own three screw holes cut through the bezel beside it, over a floor vented with 5 mm hexagons on 8 mm centres, with front insert seats inside the end plates
View Design →

PSU Mount, 2U

€30
A 2U tray for an SFX, SFX-L, TFX, Flex ATX or custom power supply, held down by two printed straps arching over the body, with a front window cut to the body’s own width, over a floor vented with 5 mm hexagons on 8 mm centres, with front insert seats inside the end plates
View Design →

PSU Tray, 2U

€40
A 3U tray for a full-size ATX power supply, held down by two printed straps arching over the body, with a front window cut to the body’s own width, over a floor vented with 5 mm hexagons on 8 mm centres, with front insert seats inside the end plates
View Design →

PSU Tray, 3U

€42
A 1U SBC tray with four mounting holes set to measured rectangular spacing on a floor vented with 5 mm hexagons on 8 mm centres, with front insert seats inside the end plates
View Design →

SBC Universal Tray, 1U

€26
A 2U removable drive caddy with captured guides connected to its fixed floor, two straps and a floor vented with 5 mm hexagons on 8 mm centres, with front insert seats inside the end plates
View Design →

Drive Bay, 2U

€41
Next