SBC Universal Tray, 1U, 7.5-inch

A 1U tray for our 7.5-inch rack, for a single-board computer this catalogue does not already name — an Odroid, a Rock Pi, an Orange Pi, a BeagleBone, or anything else roughly 120 x 120 mm or smaller.

Slots, not a guessed hole pattern. Outside the Raspberry Pi families nothing here can confirm another board’s mounting holes from a primary source, so the floor carries slots — fore and aft, several columns across — and the standoffs go wherever your board wants them.

The 7.5-inch answer to a board the size of mini-ITX’s little cousins. A 170 mm mini-ITX board does not fit this rack’s 156.5 mm floor at all, so there is no mini-ITX tray on this line — but a board up to about 120 mm square fits here with room to spare.

You supply the standoffs. Your board comes with its own, and the slots exist so this tray does not have to guess where they go.

Prints in two pieces: the bezel and the floor, one unit tall, so no seam. In the box: both, four M4 heat-set inserts pressed before shipping, and four M4 x 10 screws.

Choose: depth, front opening, and floor venting.