USB Charger Shelf, 1U, 7.5-inch

A 1U shelf for our 7.5-inch rack, strapped down for a multi-port USB charger, with a front window sized to its row of ports.

Our PSU shelf’s own geometry. Four floor inserts take a hook-and-loop strap or a cable tie over the body — the same “hold it by its outside” idea, sized for a charger, which runs more compact than the bricks that shelf targets.

A fixed window, not a dial. A charger’s ports run in one row across its face, so the opening is cut to that row.

What this is not: a power strip or a distribution panel. Nothing printed here carries voltage — the charger is your own certified unit, the same boundary as our DC-PDU panel and PSU shelf.

Prints in two pieces: the bezel and the floor, one unit tall, so no seam. In the box: both, four M4 heat-set inserts pressed before shipping, and four M4 x 10 screws.

Choose: depth and floor venting.