All Products

Previous
A 2U LED matrix panel: one square window for an 8x8 WS2812 module, with four screws and a retainer frame behind it
View Design →

LED Matrix Panel, 2U, 7.5-inch

€24
A 1U Raspberry Pi cluster tray: two windows across the bezel, one per board, over a floor vented with 5 mm hexagons on 8 mm centres and drilled for eight M2.5 standoffs, with front insert seats inside the end plates
View Design →

Raspberry Pi Cluster Tray, 1U, 7.5-inch

€25
A 1U Raspberry Pi tray on a 190.5 mm bezel: an opening for one Model B board’s USB and Ethernet edge, four clearance holes in a floor vented with 5 mm hexagons on 8 mm centres, with front insert seats inside the end plates
View Design →

Raspberry Pi Tray, 1U, 7.5-inch

€25
A 1U shelf on a 190.5 mm bezel for a small enclosed power supply up to 125 mm across, with four strap-down inserts in a floor vented with 5 mm hexagons on 8 mm centres, with front insert seats inside the end plates
View Design →

PSU Shelf, 1U, 7.5-inch

€29
A 2U braced shelf: a floor vented with 5 mm hexagons on 8 mm centres between side walls that taper from full height at the front, with a single unseamed bezel, with front insert seats inside the end plates
View Design →

Braced Shelf, 2U, 7.5-inch

€28
A 3U VESA display mount, printed as ONE plate with a lightening field and cable slots, and no seam behind the screen
View Design →

VESA Display Mount, 3U, 7.5-inch

€18
A 1U antenna panel: a flat plate with a row of round SMA bulkhead holes, up to eight across a 190.5 mm panel
View Design →

Antenna Panel, 1U, 7.5-inch

€13
A 1U meter panel: a flat plate with 48 x 29 mm cutouts for panel-mount volt and amp meters, up to three across
View Design →

Meter Panel, 1U, 7.5-inch

€13
Next