Raspberry Pi Tray, 1U, 7.5-inch

A 1U tray for our 7.5-inch rack, sized for Raspberry Pi Model B-family boards (3B onward): the official 85 x 56 mm envelope and 58 x 49 mm, M2.5 mounting pattern, unchanged since 2014.

One board, and all the depth you want behind it. The board is pinned to the BACK of the tray, so extra depth opens up in front of it rather than behind — which is where a cable coming off the ports actually needs the room. If you want two boards in a unit, that is the cluster tray.

The holes are the published rectangle, not a measurement. 58 x 49 mm on M2.5, taken from the Foundation’s own mechanical drawing. A Pi that fits one of these fits all of them.

Choose: how deep the tray runs, and how open the floor is vented.

In the box: the bezel, the vented floor, and four M4 inserts and screws for the joint between them. The standoffs are yours.