All Products

Previous
A 1U keystone patch panel: seven port openings in a recessed front face on a 190.5 mm plate
View Design →

Keystone Patch Panel, 7.5-inch

€13
A 1U fan panel on a 190.5 mm plate for three 40 mm fans — all it will take — each bore under a printed ring guard
View Design →

Fan Panel, 1U — 40 mm, 7.5-inch

€16
A 2U fan panel for two 80 mm fans, printed as ONE plate with no seam between the bores
View Design →

Fan Panel, 2U — 60 or 80 mm, 7.5-inch

€16
A 3U fan panel for two 92 mm fans, printed as ONE plate — the largest unbroken face in the 7.5-inch line
View Design →

Fan Panel, 3U — 92 mm, 7.5-inch

€18
A 1U cable pass-through bar on a 190.5 mm plate: two obround openings, up to 150 mm across, with a tie-off lip behind them
View Design →

Cable Pass-through Bar, 1U, 7.5-inch

€14
A 1U DC distribution panel on a 190.5 mm plate: six barrel-jack bores across a shallow box, and room for eight
View Design →

DC Power Distribution, 1U, 7.5-inch

€19
A 2U tray holding six 2.5-inch drives stood on edge, between two printed combs whose fins form the slots, over a floor vented with 5 mm hexagons on 8 mm centres, with front insert seats inside the end plates
View Design →

SSD Tray, 2U, 7.5-inch

€36
A 1U shelf for a desktop network switch up to 125 mm wide: a port window cut to the body, with two printed straps arching over it, on a floor vented with 5 mm hexagons on 8 mm centres, with front insert seats inside the end plates
View Design →

Switch Shelf, 1U, 7.5-inch

€31
Next