PSU Mount, 2U

For our 10-inch rack. A 2U mount using verified inlet-face mounting holes for SFX and SFX-L supplies, with TFX available where the selected rack depth allows it.

Choose Left, Center or Right placement. The body and its mounting clear the actual floor walls and front columns; screw tabs remain connected to the bezel around an opening for the inlet face.

Choose solid face, ventilation, fan mounts, keystone ports or cable openings independently on either side of the PSU. Choices follow the space left by the selected supply and attachment. Fan, jack and cable layouts require measured component, plug and lead-clearance dimensions; unavailable layouts cannot be ordered.

Each filled side adds one printed plate. You supply its four M3 x 16 screws, four M3 nuts and eight thin washers, plus any fans, compatible fan screws or keystone jacks. Fills support ATX, SFX, SFX-L and TFX; legacy Flex ATX and custom bodies retain a solid face.

The body sets the required floor depth. TFX needs the 260 mm rack. Standard 6-32 mounting screws fasten the supply through the bezel; the printed kit includes its eight bezel-to-floor inserts and M4 screws.

You supply the PSU and its compatible 6-32 screws. Choose the supply form and its position.

Prints in three pieces at the default settings. Other layouts or retention choices can change the printed-piece and hardware counts; the parts list follows the selected configuration.