Top Panel

A vented top panel for our 10-inch rack, generated to the frame’s own dimensions. Sits in the groove of the flat top rails and lets the heat out of the top of the stack.

Two depths, to match your rack. At 260 mm the lid is 254 x 260 — too wide AND too deep for a 224 mm bed — so it comes as four quadrant tiles that lap along both mid-lines, each lap clamped by a pair of M3 bolts through a solid rib. At 195 mm it is 254 x 195, too wide but not too deep, so it is cut once: two halves lapped along one seam and clamped by two bolts.

In the box: the tiles, and their M3 x 12 screws and nyloc nuts — eight of each at 260 mm, two at 195.

Choose: the depth of your rack, the vent pattern, hole size and density, and the border.