PSU Tray, 2U

For our 10-inch rack. A 2U tray with two printed straps for a power supply selected by standard form or measured custom dimensions.

Choose Left, Center or Right placement. Body height determines the strap height, and recessed screw heads make the M4 floor fasteners accessible. Width limits include the strap legs and the floor walls.

Choose solid face, ventilation, fan mounts, keystone ports or cable openings independently on either side of the PSU. Choices follow the space left by the selected supply and attachment. Fan, jack and cable layouts require measured component, plug and lead-clearance dimensions; unavailable layouts cannot be ordered.

Each filled side adds one printed plate. You supply its four M3 x 16 screws, four M3 nuts and eight thin washers, plus any fans, compatible fan screws or keystone jacks. Fills support ATX, SFX, SFX-L and TFX; legacy Flex ATX and custom bodies retain a solid face.

Available supply forms depend on width and depth. The narrow rack offers Flex ATX or Custom at its default depth; wider bodies need the 10-inch tray. Measure your supply instead of assuming that every named form has the same case depth.

The requested floor expands for the body and rear lead space. Choose the form, placement, custom dimensions where needed and floor venting. You supply the PSU.

Prints in five pieces at the default settings. Other layouts or retention choices can change the printed-piece and hardware counts; the parts list follows the selected configuration.