Side Panel

A vented side panel for our 10-inch and 7.5-inch racks, 3U at a time. Closes a flank without closing the airflow.

One panel, both racks. A side panel spans the rack’s depth and never its width, so the same panel fits a 10-inch or a 7.5-inch rack of the same depth. Own both, keep one spare.

Two depths, to match your rack. At 195 mm it is 195 x 133 mm and prints whole: one 3.0 mm plate, no seam and no hardware. At 260 mm it is 260 x 133 mm, which no 224 mm bed takes at any angle, so it comes as a front and a rear tile that lap along the depth mid-line, clamped by two M3 bolts through a solid rib; assembled, the seam is flush.

In the box: the panel — and at 260 mm, the two M3 x 12 screws and nyloc nuts for its seam.

Choose: the depth of your rack, which side, the vent pattern, hole size and density, and the border.