Switch Shelf, 1U

For our 10-inch rack. A 1U shelf for a desktop network switch, supported directly on the floor with its port face at the front opening.

Enter the measured width, depth and height. The two printed straps follow the device height, with accessible screw seats and clearance for thin customer-supplied grip pads.

The floor expands for the body and reserved rear cable space. The selected dimensions must fit the rack, including strap legs and floor walls; an oversized switch is rejected.

The kit contains the printed mount, twelve M4 inserts and twelve M4 × 10 screws. You supply the switch and cushioning pads. Choose body dimensions, floor depth and venting.

Prints in four pieces at the default settings. Other layouts or retention choices can change the printed-piece and hardware counts; the parts list follows the selected configuration.